Many consumers do not know how to calculate the thickness of epoxy self-leveling floor. In order to solve your doubts, the following Guanglei floor paint manufacturer will give you a detailed description of how to calculate the thickness of epoxy self-leveling floor. Epoxy self-leveling floor consists of three coatings: bottom coatings, middle coatings and surface coatings. The calculated thickness of the coatings is only middle coatings and surface coatings. After coating, the floor paint material of the bottom coatings will penetrate into the foundation, and the thickness of the coatings is not counted.
Case: 2.0mm epoxy self-leveling floor, cement foundation ground smoothness (within 2-3mm/2M), strength (C25).
1. The conventional dosage of primer material is 0.15kg/, and the primer coating is not thick, because no filler is added to the primer coating during construction, and a pure primer material is rolled together.
2. Coating in mortar is a process to increase the thickness of the project. The amount of coating used in 2.0mm epoxy self-leveling floor project is 0.45kg/. The filler quartz sand of the same weight can be added at 1:1. The number of coating construction paths depends on the thickness of the coating. The actual thickness of the coating is about 1mm.
3。 Epoxy self-leveling floor topcoat is the ultimate decorative layer dosage is 1。0kg/, and the thickness is about 1mm。
标签:   地坪 环氧地坪漆 环氧地坪 环氧地坪施工